ZM6 Specifications
|
Voltage |
12- volt or 24-volt (switched via jumper) |
|
Polarity types |
"N" or "P" switching (switched via fuse) |
|
Charging stages |
Bulk – Absorption - Float |
|
Adjustable ratio Absorption to Float |
Yes, adjustable by user (0 to 2 volts) |
|
The factory setting for ratio |
(12v) 0.6 volt - (24v) 1.2 volts |
|
Approximate time at the Absorption rate |
Adjustable 0-140 minutes |
|
Absorption Indicator |
Yellow LED |
|
Float Indicator |
Green LED |
|
Alternator range |
0-350-amp alternator |
|
Maximum Field current |
5 amps (most alternators are 2-4 amps) |
|
12-volt version voltage adjustment range |
12 to 15.5 volts |
|
The factory setting for voltage regulation |
(12v) 14.7 volts - (24v) 29.4 volts |
|
24-volt version voltage adjustment range |
24 to 32 volts |
|
Reverse polarity protection |
Yes |
|
Overvoltage protection |
Yes, adjustable by the user, a RED LED to indicate overvolt and unit will shut down Field |
|
The factory setting for overvoltage protection |
(12v) 15.5 volts - (24v) 31 volts |
|
Temperature monitoring |
One channel only |
|
Overvoltage/overtemperature protection |
Shuts off FIELD control |
|
Low voltage protection |
Shuts off FIELD control (factory set 10v) |
|
Overvoltage/overtemperature Indicator |
Red LED and buzzer (supplied) |
|
Unit size |
167mm long x 43mm high x 100mm wide. |
|
Weight |
250 grams |
|
Fuses (Field) draws up to 5 amps |
Fitted inside unit 5 amp mini blade |
|
Fuses (Ignition) draws less than 130ma |
Ignition recommend 5 amp |
|
Fuses (Battery sense) draws up to 5 amps |
Battery sense recommended 5 amp |
|
Slow ramp up ( for belt slip) |
Approx 8 seconds |
|
Case material |
Marine grade aluminuim, powder coated with exterior grade Protexture Black materials |